Publications
- Mahoney AW, Sarrazin JC, Bamberg E, and Abbott JJ, “Velocity control with gravity compensation for magnetic helical swimmers”, Advanced Robotics (in press)
- Liu X, Bamberg SJM, Bamberg E, “Increasing the accuracy of level-based volume detection of medical liquids in test tubes by including the optical effect of the meniscus”, Measurement 44, pp. 750-761 (2011). Download document here
- Shah A, Mufti NA, Rakwal D, Bamberg E, “Material removal rate, kerf, and surface roughness of tungsten carbide machined with wire electrical discharge machining”, Journal of Materials Engineering and Performance 20(1), pp 71-76 (2011). Download document here
- Heamawatanachai S, and Bamberg E, “Cutting force model of orbital single-point micromachining tool”, International Journal of Machine Tools & Manufacture 50(9), pp. 815-823 (2010). Download document here
- Heamawatanachai S, and Bamberg E, “Design and characterization of a PZT driven micromachining tool based on single-point tool tip geometry”, Precision Engineering 33(4), pp. 387-394 (2009). Download document here
- Rakwal D, Heamawatanachai S, Tathireddy P, Solzbacher F, and Bamberg E, “Fabrication of high aspect ratio silicon micro-electrode arrays using micro-wire electrical discharge machining (m-WEDM)”, Microsystem Technologies 15(5), pp. 789-797 (2009). Download document here
- Rakwal D, and Bamberg E, “Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining”, Journal of Materials Processing Technology 209(8), pp. 3740-3751 (2009). Download document here
- Rakwal D, and Bamberg E, “Electrical discharge machining promises high-quality, lower-cost substrates”, Compound Semiconductor, March 2009, pp. 17-18 (2009).
- Bamberg E, and Heamawatanachai S, “Orbital electrode actuation to improve efficiency of drilling micro holes by micro-EDM”, Journal of Materials Processing Technology 209(4), pp. 1826-1834 (2009).. Download document here
- Liu X, Corbin BJ, Bamberg SJM, Provancher WR, and Bamberg E, “Optical system to detect volume of medical samples in labeled test tubes”, Optical Engineering 47(9) 094402 (2008). Download document here
- Bamberg E, and Rakwal D, “Experimental investigation of wire electrical discharge machining of gallium doped germanium”, Journal of Materials Processing Technology 197(1-3), pp. 419-427 (2008). Download document here
- Bamberg E, Grippo CP, Wanakamol P, Slocum AH, Boyce MC, and Thomas EL, “Device for in situ atomic force microscope mechanical testing”, Precision Engineering 30(1), pp. 71-84 (2006). Download document here
- Bamberg E, and Slocum AH, “Concrete-based constrained layer damping”, Precision Engineering 26(4), pp. 430-441 (2002). Download document here